I've just started investigating using the Juniper telemetry interface for analytics on MX routers, but I'm having some problems getting it running.
I'm using the Juniper Open NTI collector, which is up and running (default config, no changes made whatsoever), however it never receives any data, as confirmed by a tcpdump on the box. My setup is thus: testlab@MXtestlab # run show version Hostname: MXtestlab Model: mx240 Junos: 15.1R4-S2.1 sensor test-sensor { server-name open-nti; export-name test-telemetry; polling-interval 100000000; resource /junos/system/linecard/interface/; } streaming-server open-nti { remote-address 10.100.0.127; remote-port 50000; } export-profile test-telemetry { local-address 10.100.0.96; local-port 30010; reporting-rate 1000; format gpb; transport udp; } The problem I see is that "show agent sensors" never reports a sensor: testlab@MXtestlab# run show agent sensors {master}[edit services analytics] I've read over the Juniper docs and can't see anything obvious that I'm missing, however I'm sure it is something simple. If anyone has any idea's I'd love to hear them! TIA _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp