Yes, I did try "restart SDN-Telemetry immediately", but there was no effect.
Unfortunately I'm not able to try a different version at this point in time. -----Original Message----- From: david....@orange.com [mailto:david....@orange.com] Sent: 11 April 2017 3:41 PM To: Shaffi Khan <shaf...@interxion.com>; juniper-nsp@puck.nether.net Subject: RE: [j-nsp] JunOS Telemetry Strange. It works for me. Maybe a bug or a limitation with your version ? Did you try to force SDN-telemetry restart ? -----Message d'origine----- De : Shaffi Khan [mailto:shaf...@interxion.com] Envoyé : mardi 11 avril 2017 15:57 À : ROY David DTSI/DERS; juniper-nsp@puck.nether.net Objet : RE: [j-nsp] JunOS Telemetry Hmm, I'm not seeing any sensors there start shell pfe network fpc2 RMPC platform (1200Mhz QorIQ P2020 processor, 3584MB memory, 512KB flash) NGMPC2(MX-testlab-re0 vty)# show agent sensors ID Name ---------- -------------------------------- Total number of SENSOR = 0 I've just seen this on the documentation page: "Junos Telemetry Interface was introduced in Junos OS Release 15.1F3 on MX Series routers" https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/junos-telemetry-interface-configuring.html I wonder if it is because I'm running 15.1R4? It's odd that the telemetry commands are available though.... -----Original Message----- From: david....@orange.com [mailto:david....@orange.com] Sent: 11 April 2017 2:37 PM To: Shaffi Khan <shaf...@interxion.com>; juniper-nsp@puck.nether.net Subject: RE: [j-nsp] JunOS Telemetry Ok. Could you check at PFE level if sensors are well instanced ? start shell pfe network fpcX show agent sensors ex. show agent sensors Jvision ID Name ---------- -------------------------------- 13222432 sensor-13 5000(300) 13222433 sensor-12 5000(4902) 13222434 sensor-11 5000(1348) 13222439 sensor-14 5000(843) 13222443 sensor-18 0(0) 13222464 sensor-23 5000(300) 13222465 sensor-22 5000(4001) 13222466 sensor-21 5000(1348) 13222471 sensor-24 5000(843) 13222475 sensor-28 0(0) 129585707 __default_fabric_sensor__ 5000(3972) Total number of jvision SENSORs = 11 -----Message d'origine----- De : Shaffi Khan [mailto:shaf...@interxion.com] Envoyé : mardi 11 avril 2017 15:35 À : ROY David DTSI/DERS; juniper-nsp@puck.nether.net Objet : RE: [j-nsp] JunOS Telemetry Hi David It seems to be running: show system processes extensive | match agentd 20980 root 1 20 0 717M 5584K select 0 0:05 0.00% agentd 20997 root 1 24 0 720M 4468K select 3 0:00 0.00% stats-agentd Polling is a large number because the value is measured in nano seconds: {master}[edit services analytics sensor test-sensor] testlab@MXtestlab# set polling-interval ? Possible completions: <polling-interval> Define sensor polling interval in nano secs (nanoseconds) So I'm polling every 0.1 seconds. Simarly, reporting-rate under export-profile is measured in milliseconds, so I'm reporting every second. -----Original Message----- From: david....@orange.com [mailto:david....@orange.com] Sent: 11 April 2017 2:24 PM To: Shaffi Khan <shaf...@interxion.com>; juniper-nsp@puck.nether.net Subject: RE: [j-nsp] JunOS Telemetry Hello Does agent is running ? show system processes extensive | match agentd 26812 root 3 20 0 735M 13136K nanslp 1 0:15 0.00% agentd You could try to restart process : restart SDN-Telemetry immediately I see your polling interval is very high David -----Message d'origine----- De : juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] De la part de Shaffi Khan Envoyé : mardi 11 avril 2017 15:05 À : juniper-nsp@puck.nether.net Objet : [j-nsp] JunOS Telemetry I've just started investigating using the Juniper telemetry interface for analytics on MX routers, but I'm having some problems getting it running. I'm using the Juniper Open NTI collector, which is up and running (default config, no changes made whatsoever), however it never receives any data, as confirmed by a tcpdump on the box. My setup is thus: testlab@MXtestlab # run show version Hostname: MXtestlab Model: mx240 Junos: 15.1R4-S2.1 sensor test-sensor { server-name open-nti; export-name test-telemetry; polling-interval 100000000; resource /junos/system/linecard/interface/; } streaming-server open-nti { remote-address 10.100.0.127; remote-port 50000; } export-profile test-telemetry { local-address 10.100.0.96; local-port 30010; reporting-rate 1000; format gpb; transport udp; } The problem I see is that "show agent sensors" never reports a sensor: testlab@MXtestlab# run show agent sensors {master}[edit services analytics] I've read over the Juniper docs and can't see anything obvious that I'm missing, however I'm sure it is something simple. If anyone has any idea's I'd love to hear them! TIA _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
