Been looking at fusion edge with qfx5100 and ex4300.
Using 16.X code and so far so good.
On 19/07/2017, 21:03, "juniper-nsp on behalf of Alain Hebert"
<juniper-nsp-boun...@puck.nether.net on behalf of aheb...@pubnix.net> wrote:
Hi,
Anyone has feedback about Fusion when MX240-MX960 and QFX5100 are
concerned.
Our foray into QFX5100/VCF only was not very successful. :(
--
-----
Alain Hebert aheb...@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
