Are you setting icmp-tunneling on all the routers? It be helpful to see your configuration.
On Thu, Aug 24, 2017 at 7:44 AM, Aaron Gould <aar...@gvtc.com> wrote: > I removed all rsvp and label-switched-path configs for a moment… then with > only mpls l3vpn configs, I turned on the icmp-tunneling. Still don’t see p > hops on traceroute > > > > r1@lab-mx104:r1> traceroute 1.1.10.2 wait 1 > > traceroute to 1.1.10.2 (1.1.10.2), 30 hops max, 40 byte packets > > 1 1.1.0.2 (1.1.0.2) 0.469 ms 0.401 ms 0.366 ms > > 2 * * * > > 3 * * * > > 4 1.1.10.1 (1.1.10.1) 0.648 ms 0.583 ms 0.500 ms > > 5 1.1.10.2 (1.1.10.2) 0.647 ms 0.653 ms 0.541 ms > > > > On ingress pe, I did this “set protocols mpls no-propagate-ttl” > > > > r1@lab-mx104:r1> traceroute 1.1.10.2 wait 1 > > traceroute to 1.1.10.2 (1.1.10.2), 30 hops max, 40 byte packets > > 1 1.1.0.2 (1.1.0.2) 0.458 ms 0.402 ms 0.414 ms > > 2 1.1.10.1 (1.1.10.1) 0.497 ms 0.413 ms 0.455 ms > > 3 1.1.10.2 (1.1.10.2) 0.646 ms 0.641 ms 0.669 ms > > > > This is all inside one mx104 running about 9 logical-systems. > > > > -Aaron > > > > > > > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp