Hi,
Am 15.11.2017 um 09:13 schrieb Sebastian Becker:
that’s not right. You need to differ between redundancy and non-redundancy-mode:
With Fabric Redundancy in MX960 (SCBEs: 2 active, 1 spare):
Premium2 Chassis (non-enhanced midplane):
MPC5E205G
MPC7E400G
Premium3 Chassis (enhanced midplane):
MPC5E240G
MPC7E480G
In the non-redundant mode (so all three SCBEs are online and active) you will
not suffer from any limitation as long as all three are online. But if one dies
you will have the limitations in a Premium2 chassis. So it depends on the model
you want to use. We need a full redundant switching fabric so we have to
calculate with these limitations.
At least according to my information there is no difference in enhanced/non
enhanced for MPC7 on SCBE2 in any MX.
There is no way to get full 480G with 2+1 with SCBE2. You can get 480 in 3+0
mode. (both on MX960)
The first SCB* with 2+1 and Linerate for MPC7 will be SCBE3.
But hey, your version would make more sense but all my documents and
information since the release of MPC7 say otherwise.
On the other hand there are not many customers in DE who would/should know
better :)
--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
