Hi all, so after checking that with Juniper we have got an update:
MPC7E with SCBE2, Fabric Redundancy, Premium2 und Premium3: 340G Premium2 Chassis (non-enhanced midplane): MPC5E 205G MPC7E 400G - now 340G Premium3 Chassis (enhanced midplane): MPC5E 240G MPC7E 480G - now 340G So even the MPC7-10G will have a performace penalty on both midplanes in the redundancy mode. — Sebastian Becker > Am 17.11.2017 um 17:38 schrieb Eduard Schornig <edu...@schornig.ro>: > > Hi, > > Sebastian is correct, MPC7-MRATE has a performance penalty on old > midplane. There is no difference for MPC7-10G (40 x 10G). > > -- > BR, > Eduard Schornig > > On Thu, Nov 16, 2017 at 5:43 PM, Tobias Heister <li...@tobias-heister.de > <mailto:li...@tobias-heister.de>> wrote: > Hi, > > Am 16.11.2017 um 10:36 schrieb Sebastian Becker: > this is the information out of the "Juniper Tech Club" in Cologne in June > 2016. So not only provided to us. > If needed I can verify that with Juniper. > > Feel free to do that. My informationen and recent verification from Juniper > confirm my assumption (hence no speed difference between midplanes for MPC7 > and only 480G in 3+0) > > > -- > Kind Regards > Tobias Heister > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > <mailto:juniper-nsp@puck.nether.net> > https://puck.nether.net/mailman/listinfo/juniper-nsp > <https://puck.nether.net/mailman/listinfo/juniper-nsp> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp