Hi We have seen a change in how junos handles age in command "show route". In Junos 15.1R bgp routes age told you how long the route had been present in the routing table. If you have a dual homed customer bgp age timer showed how long time ago the customer advertised the route. Very practical to see how stable the customer connection has been.
In 15.F and new releases this has been changed so that any change to the route will reset the age time. If a route goes from inactive to active "route age" gets reset. If your igp changes so the outgoing interface changes the "route age" gets reset. We been trying to get juniper to change back the behavior but Juniper engineering thinks it's now working as it should. We haven't been able to find any RFC the describes route age. The only argument towards Juniper that we have is that they are changing default behavior. Are there any one else that has seen this new "route age" behavior and have any open cases with Juniper, or have any good argument that we can throw at Juniper? Kindly Magnus Bergroth _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp