I had an MX80 crash (insert sad face here) - worse problem was that it did a crash dump and then did NOT reboot. I have out-of-band serial access to the console, so I could see that, after the dump completed, it just printed:
watchdog: scheduling fairness gone for 240 seconds now. every 20 seconds (with the seconds count increasing). I had to open a remote-hands ticket to get it power cycled. Is there any way to for a reboot at that point? Like, on old Sun servers, sending a BREAK followed by certain other keys could get to the firmware and hard-reboot the system, even with the OS was fubar. Is there anything like that on a Juniper? -- Chris Adams <c...@cmadams.net> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
