As FYI, the ability to enter db from console has been disabled in recent builds for security reasons. In effect this makes system debugger-on-break (hidden) configuration moot. There is a work around in the form of a panic package, which I assume is available externally given the info in below.
See pr 1352217 for added info/external content that was to be added to release notes. Regards -----Original Message----- From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> On Behalf Of Saku Ytti Sent: Thursday, May 31, 2018 10:18 AM To: Juniper List <juniper-nsp@puck.nether.net> Subject: Re: [j-nsp] Force a reboot from the serial console? Hey Chris, On 31 May 2018 at 20:04, Chris Adams <c...@cmadams.net> wrote: > Is there any way to for a reboot at that point? Like, on old Sun > servers, sending a BREAK followed by certain other keys could get to > the firmware and hard-reboot the system, even with the OS was fubar. > Is there anything like that on a Juniper? set system debugger-on-break Break would instruct CPU to start executing code where the debugger lives, and from debugger, insha'allah you could reboot the system. -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_juniper-2Dnsp&d=DwICAg&c=HAkYuh63rsuhr6Scbfh0UjBXeMK-ndb3voDTXcWzoCI&r=XSgLl7mh02L6OImBTZGsP5G8vLy-P4u4j8Eu8itOlmQ&m=IjoezZaNUquNEjft1_Dq8WwAkeBaKJnemkoAA1PsCA8&s=qoSuuf6jmvQ2Cu_GsjHmkKQvJRva4U9t0b9Zx4zSQkU&e= _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp