Brian, are you talking about this kit: https://www.racksolutions.com/2-post-rack-rails.html
On Thu, Aug 2, 2018 at 11:25 AM, Nelson, Brian <brian.nel...@utdallas.edu> wrote: > Yes, I have these kits in production, without the back cable mgmt rail. > Work just fine. They are beefier than the pictures depict. > > Brian Nelson > > On 08/02/2018 10:08 AM, Colton Conor wrote: > > Tim, > > > > Have you used this 2 post rack rails with the QFX5100? It looks like this > > rail kit has a back plate, does the power cables fit through those holes? > > This QFX5100 is long. > > > > > > > > On Wed, Aug 1, 2018 at 5:48 PM, Tim Jackson <jackson....@gmail.com> > wrote: > > > >> https://www.racksolutions.com/2-post-rack-rails.html > >> > >> -- > >> Tim > >> > >> On Wed, Aug 1, 2018 at 5:39 PM, Colton Conor <colton.co...@gmail.com> > >> wrote: > >> > >>> We are constantly having to mount these larger switches to two post > racks. > >>> To my knowledge Juniper does not make 2 post mounting brackets for > these > >>> switches. Does anyone have any recommendations on a shelf or something > to > >>> hold these up? We are dealing with 19 and 23 inch racks. > >>> _______________________________________________ > >>> juniper-nsp mailing list juniper-nsp@puck.nether.net > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > >>> > >> > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > -- > Supervisor > Computing Systems Support > Dept of Computer Science > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp