set forwarding-options sampling instance inline input rate 128 This sets a sampling rate of 128:1. Is that intentional?
Dave On Wed, 2 Jan 2019 at 10:08, A. Camci <avciguz...@gmail.com> wrote: > Hi Steinar, > > see the config: > > set services flow-monitoring version-ipfix template ipv4 ipv4-template > set services flow-monitoring version-ipfix template ipv6 ipv6-template > > > set forwarding-options sampling instance inline input rate 128 > set forwarding-options sampling instance inline family inet output > flow-server xx.xx.10.34 port 2055 > set forwarding-options sampling instance inline family inet output > flow-server xx.xx.10.34 version-ipfix template ipv4 > set forwarding-options sampling instance inline family inet output > inline-jflow source-address xx.xx.0.238 > > set forwarding-options sampling instance inline family inet6 output > flow-server xx.xx.10.34 port 2055 > set forwarding-options sampling instance inline family inet6 output > flow-server xx.xx.10.34 version-ipfix template ipv6 > set forwarding-options sampling instance inline family inet6 output > inline-jflow source-address xx.xx.0.238 > > set chassis fpc 0 sampling-instance inline > set forwarding-options sampling instance inline family inet output > flow-server xx.xx.10.34 version-ipfix template ipv4 > set forwarding-options sampling instance inline family inet6 output > flow-server xx.xx.10.34 version-ipfix template ipv6 > set protocols bgp group fulltable-2-genie neighbor xx.xx.10.34 > > set interfaces ae0 unit 0 family inet sampling input > set interfaces ae0 unit 0 family inet6 sampling input > set interfaces ae1 unit 0 family inet sampling input > set interfaces ae1 unit 0 family inet6 sampling input > set interfaces ae5 unit 0 family inet sampling input > set interfaces ae5 unit 0 family inet6 sampling input > > > is a reboot necessary after the configuration ? > > thanks > ap > > Op wo 2 jan. 2019 om 10:56 schreef <sth...@nethelp.no>: > > > > Does anyone have experience with GENIEATM ( 6.3.2 ) and Juniper MX480 > > MPCE > > > Type 2 3D ( 16.1R4-S3.6). > > > recently we use the inline-jflow monitoring. > > > > > > it works but we receive too little sampling. > > > expect a 10k of sampling per second instead of 100 samples > > > > We have quite a bit of experience with inline-jflow/IPFIX. It mostly > > works just fine. Show your JunOS config, please. > > > > Steinar Haug, Nethelp consulting, sth...@nethelp.no > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp