Hi! Saku I have tried you advice but there is no "output-traffic-control-profile" under "class-of-service interfaces et-x/x/x" in QFX10K. different from other Juniper gears, QFX COS configuration is very weired.
BR! Chen Jiang On Thu, Feb 20, 2020 at 10:03 PM Saku Ytti <s...@ytti.fi> wrote: > Hey James, > > PE chip certainly does support egress shaping and have QoS inside the > subrate (HQoS). > > Try this: > > set class-of-service traffic-control-profiles tcp-5G scheduler-map > YOUR_SCHEDULER > set class-of-service traffic-control-profiles tcp-5G shaping-rate 5g > set class-of-service interfaces et-0/0/6:1 output-traffic-control-profile > tcp-5G > > Ingress shaping is not supported. > > On Thu, 20 Feb 2020 at 14:46, Chen Jiang <iloveb...@gmail.com> wrote: > > > > Hi! Experts > > > > Sorry for disturbing, we found the "set class-of-service interfaces xxx > > shaping-rate" is missing in QFX platform, is there any other method could > > do port shaping ? > > > > Thanks for your help. > > > > -- > > BR! > > > > > > > > James Chen > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > -- > ++ytti > -- BR! James Chen _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
