Try configuring with "forwarding-class-sets". It looks the same as CoS on QFX5K:
set class-of-service interfaces et-0/0/0 forwarding-class-set TEST output-traffic-control-profile TEST On Fri, Feb 21, 2020 at 5:22 PM Saku Ytti <s...@ytti.fi> wrote: > On Fri, 21 Feb 2020 at 02:48, Chen Jiang <iloveb...@gmail.com> wrote: > > > I have tried you advice but there is no "output-traffic-control-profile" > under "class-of-service interfaces et-x/x/x" in QFX10K. different from > other Juniper gears, QFX COS configuration is very weired. > > This works in PTX10k and PTX1k which is 100% same PE chip, but > unfortunately the whole catalyst6500/7600 issue with different > software. So certainly something PE chip can do, but I don't have > QFX10k handy to check if this is exist in any QFX10k release. I would > either check later release in lab or ask account team. > > > -- > ++ytti > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp