--- Begin Message ---
#1, yes 16XGE module works with all varieties if SCB. I assume you already own
the equipment list. I therefore 'think' your question/concern is with such
equipment, any concern going from 16.2 to some later release, which I am
guessing might be something like 18.4R2-S3 (TAC recommended I believe). You
should have no concerns, that I am aware of.
If the list below is something you are planning to purchase (you must have at
least 1 x MX, as you have experience with MX on 16.2), I would HIGHLY recommend
that instead of below, you look at a MX204 instead. Very likely less cost,
more performance (400GE capable), and you can pair any 2 MXs for your
redundancy, as Routing (BGP) is the solution, not HW. The downside is, if you
want more 10GE connections, you would need to use a proper 40GE Optic (MX205 4
x 100GE ports, support either 100GE or 40GE - QSFP+) and then use some sort of
breakout scheme. The breakout scheme is generally an external patch panel of
some sort - plenty [non-Juniper] options for this.
In general, IMHO, if looking to upgrade older MXs, you should always at least
look at an MX204 solution too.
Just FYI. Rich
Richard McGovern
Sr Sales Engineer, Juniper Networks
978-618-3342
I’d rather be lucky than good, as I know I am not good
I don’t make the news, I just report it
On 2/26/20, 8:46 AM, "Alain Hebert" <aheb...@pubnix.net> wrote:
Beside the RE-S-2000-4096-S being EOL. My experience with 16.2 was
pretty solid.
We're planning to have 3 Full Routes BGP and the MPLS alphabet
soup, yadi yada.
We don't want 2 RE since we'll use 2 MX240 and there is no point to
go for ISSU since the RE is EOL.
1x CHAS-BP-MX240-S
1x FFANTRAY-MX240-HC
1x RE-S-2000-4096-S
1x SCBE-MX-S
2x PWR-MX480-1200-AC
1x MPC-3D-16XGE-SFPP
--
-----
Alain Hebert aheb...@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911
https://urldefense.com/v3/__http://www.pubnix.net__;!!NEt6yMaO-gk!TijPAXAj8Uq34U6lspy0FkJmqZrDYdYw3bJlFWHv-45OdTbxjhuOid7PX8oqg5xrNw$
Fax: 514-990-9443
--- End Message ---
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp