On 8/Apr/20 16:33, Tarko Tikan wrote: > > I don't have any 204s but perhaps use flex-flow-sizing instead manual > table sizes? > > And if you do a lot of flow then you need to raise flow-export-rate > from default as well. Does one need to reboot the box if you switch to "flex-flow-sizing"? The documentation seems to say so if you're going from the old format to the new one. Mark. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
- [j-nsp] Netflow config for MX204 Liam Farr
- Re: [j-nsp] Netflow config for MX204 Mark Tinka
- Re: [j-nsp] Netflow config for MX204 John Kristoff
- Re: [j-nsp] Netflow config for M... Mark Tinka
- Re: [j-nsp] Netflow config f... Mark Tinka
- Re: [j-nsp] Netflow conf... Alain Hebert
- Re: [j-nsp] Netflow config for M... Tarko Tikan
- Re: [j-nsp] Netflow config f... Mark Tinka
- Re: [j-nsp] Netflow conf... Tarko Tikan
- Re: [j-nsp] Netflow... Liam Farr
- Re: [j-nsp] Net... Timur Maryin via juniper-nsp
- Re: [j-nsp] Net... Liam Farr
- Re: [j-nsp]... Timur Maryin via juniper-nsp
- Re: [j-nsp] Net... Richard McGovern via juniper-nsp
- Re: [j-nsp] Netflow... Mark Tinka
- Re: [j-nsp] Net... Tarko Tikan
- Re: [j-nsp] Netflow... John Kristoff
- Re: [j-nsp] Net... Liam Farr