--- Begin Message ---
By any chance does you config/design include LSYS? If yes export could/will
have issues, BUT at same time this combination is not officially supported
together to start with. So if trying to use these together, you are on your
own.
https://kb.juniper.net/InfoCenter/index?page=content&id=KB27035&actp=RSS
FYI Only, Rich
Richard McGovern
Sr Sales Engineer, Juniper Networks
978-618-3342
I’d rather be lucky than good, as I know I am not good
I don’t make the news, I just report it
On 4/9/20, 3:35 AM, "Timur Maryin" <timamar...@mail.ru> wrote:
On 09-Apr-20 08:20, Liam Farr wrote:
> Hi,
>
> changed to a loopback address on one of the VRF's,
...
> Not sure specifically what I am doing wrong here, it seems to be
collecting
> the flows ok, but exporting is the issue?
>
> I'd appreciate any advice or pointers thanks :)
maybe this?
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/routing-instance-edit-forwarding-options-sampling.html
--- End Message ---
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
