Igor:
Tested the code this AM, saw 3 strange things:
1. First, when I use Connect the first time, I see "Searching
for Partnership File....". It takes ~3 seconds to popup
after I hit the Connect button, but it works. The second
time, though, it reads "Initiating Remote Network Search...".
This suggests there's two different things going on?
2. Looking at the tcpdump traffic, there's no connection being
made to gnutella.getengaged.net.
3. Looking in the Gnutella.log file, it appears to be connecting
not to gnutella.getengaged.net, but to itself. That can't
be right. :) It *should* show in this file that it's connected
to the remote server, shouldn't it?
cheers,
Scott
On Thu, 11 Apr 2002, Igor Kotelevsky wrote:
> Hello Scott.
>
> Now "Connect" button of "Remote network" dialog is implemented as no
> options.
> First, it tries to connect directly. Afterwards Kaboodle sets timer.
> If before end this time interval removed connection does not be fixed,
> that Kaboodle does a partner search via gnutella.getengaged.net.
> This time domain is determined in the file stdafx.h as value
> _MAX_TIME_DIRECT_CONNECTION_SEC.
> Current value is 5 seconds.
> All these changes already inhere in CVS server.
> Now I begin to execute "Week of 8-Apr Kaboodle work list".
>
> - Cheers, Igor.
>
>
> ----- Original Message -----
> From: "Scott C. Best" <[EMAIL PROTECTED]>
> To: "Igor Kotelevsky" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Wednesday, April 10, 2002 12:16 AM
> Subject: Re: 8-April status (2 of 2)
>
>
> > Igor:
> > Heya. Some feedback:
> >
> > > > Scott wrote:
> > > > Ideally, Kaboodle would start the search with the
> > > > IP-address in that file, and then move on to search at
> > > > "gnutella.getengaged.net" if the first search doesn't work.
> > >
> > > As temporary decision I has realized following.
> > > In dialogue "Remote Networks" are added 2 independent radio buttons
> > > - "Use Gnutella (more safety)" and
> > > - "Direct connection (more promptly)".
> > > If the user selects first button (default button) - than Kaboodle
> > > uses old VPN algorithm.
> >
> > Hmmm. Not sure. The "old VPN algorithm" is supposed to
> > search for partners by connecting to gnutella.getengaged.net.
> > Your update still searches for partners by connecting to the
> > IP address in the PartnershipFile.
> >
> > For a temporary implementation, what you have is good.
> > Once you debug it, though, we should set up the "Connect" button
> > so that there are no options. First, it tries to connect directly.
> > If that fails, it does a partner search via gnutella.getengaged.net.
> >
> > After that, we need to focus on the VNC tunneling update
> > as per an earlier email.
> >
> > Thanks!
> >
> > -Scott
> >
> >
>
>
_______________________________________________
Kaboodle-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/kaboodle-devel
