On Mon, Feb 18, 2013 at 1:55 AM, horseriver <[email protected]> wrote:
> hi:) > > The gdtr reg saves the base address of gdt , whether is this address a > linear address or phisical address ? > According to Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3B: System Programming Guide, Part 2 for 64 bit machines: On processors that support Intel 64 architecture, the base-address fields for FS, GS, GDTR, IDTR, and TR must contain canonical addresses. Look for definition of canonical addresses here: http://en.wikipedia.org/wiki/X86-64 According to this book all addresses in GDTR, LDTR and IDTR are linear addresses http://books.google.co.uk/books?id=l8QPUGuElFwC&pg=SA7-PA15&lpg=SA7-PA15&dq=GDTR+32+bit&source=bl&ots=4rS-pTNmaE&sig=CasnhDIFc9pVr0fsAlNqAod-xFc&hl=en&sa=X&ei=vRoiUZXDAojK0QXf8IHYBA&ved=0CEgQ6AEwBQ#v=onepage&q=GDTR%2032%20bit&f=false Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3A: System Programming Guide, Part 1 page 65 The linear address of the base of the GDT is contained in the GDT register (GDTR); the linear address of the LDT is contained in the LDT register (LDTR). However for 32 bit registers, this document provides some details in protected mode: http://home.swipnet.se/smaffy/asm/info/PMODEDetailedApproach.txt > thanks! > > _______________________________________________ > Kernelnewbies mailing list > [email protected] > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies > -- Thank you Warm Regards Anuz
_______________________________________________ Kernelnewbies mailing list [email protected] http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
