Hi Orson, Please find attached a small patch that handles multiple pad connections.
Regards Russell On Sat, Sep 23, 2017 at 11:03 AM Russell Oliver <[email protected]> wrote: > Hi, > > Maciej : I had a look at the rounding issue and I couldn't find an > obvious reason for it. > It might be due to the translation of all components to the middle of the > sheet, but I round that off to the nearest 100mil. > > I'll take a look at that pin mapping problem, I think your solution of > multiple pins will work fine. > > Regards > Russell > > > On Sat, Sep 23, 2017 at 1:20 AM Maciej Sumiński <[email protected]> > wrote: > >> On 09/20/2017 05:38 PM, jp charras wrote: >> > Le 20/09/2017 à 17:32, Maciej Sumiński a écrit : >> >> On 09/20/2017 05:29 PM, jp charras wrote: >> >> [snip] >> >>> After tests with 2 schematics I found a rounding issue in coordinates >> (especially wires and pins): >> >>> Many coordinates are very near (1 mil, therefore one Eeschema unit) >> the 50 mils grid but not exactly >> >>> on grid (for instance 499 instead of 500 mils) >> >>> The a few values I checked are smaller (one mil) than the grid >> coordinate, so I am thinking this is >> >>> a rounding issue. >> >> >> >> Would you share an example schematic file, so we could investigate the >> >> problem? >> >> >> >> Regards, >> >> Orson >> > >> > Attached the 2 schematics I tested. >> > They can be found on Github. >> >> Jean-Pierre, >> >> Could you help me find pins/wires that are not connected due to rounding >> errors? I did my best, but I cannot find anything neither by looking at >> the files saved in KiCad format nor in ERC reports. >> >> I noticed only missing junction marks on some of the T-shaped wire >> connections, but they are missing in the original Eagle files, so I >> assume it is fine. >> >> There is a minor bug that causes small squares on pins (as if they were >> not connected), but as soon you move a single component, they all >> disappear. This should be investigated, but it is not a rounding problem. >> >> Regards, >> Orson >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~kicad-developers >> Post to : [email protected] >> Unsubscribe : https://launchpad.net/~kicad-developers >> More help : https://help.launchpad.net/ListHelp >> >
0001-Eagle-Import-Handle-muli-pad-pins.patch
Description: Binary data
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
