Bob La Quey wrote:
Oops. I made an error transscribing the USB data
Here on machine with printer is copy and paste
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=2b17 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=HP LaserJet 1020
S: SerialNumber=JL2F39Z
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
This cut from
$cat /proc/bus/usb/devices
logs show the firmware downloading successfully.
How do I set lpr printer? lpr -P "whatgoeshere"
lpr -P<printer_queue>
Notice no space between "P" and <printer_queue>
Just thrashing around in the swamp :) No real clue what
I am doing.
BobLQ
--
Best Regards,
~DJA.
--
[email protected]
http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
