Steve I looked at the gear photos on your website and they are just as I remember them. The long taper towards the mounting bracket for nose wheel and the straight side that goes from bottom to top. I see a taper on the end that is the up or top end of the gear. The top cut looks perpendicular to the long taper that goes towards the mounting bracket. I realize we are about to beat this poor horse to death. I am now concerned that Sid didn't mount the fiberglass gear properly.
Larry H > On Jul 10, 2014, at 6:51 PM, "Steve G. via KRnet" <krnet at list.krnet.org> > wrote: > > It is readily apparent as one side of the taper fits the contour of the > mounting bracket perfectly. > > Steve Glover > > Sent from my iPhone > >> On Jul 10, 2014, at 16:32, Flesner <flesner at frontier.com> wrote: >> >> At 02:23 PM 7/10/2014, you wrote: >>> The TD version still has the straight leading edge and rear taper. Tri gear >>> is tapered on both sides. >>> Steve Glover >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> >> If the tri-gear leg has two tapers, that begs the question: which taper do >> you use against the bracket? I'm assuming the instructions cover that. >> >> Larry Flesner > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options