I am deep into airframe wiring. 90% complete 70% to go. I think I have wasted
$20 in terminal ends. The panel is now a psuedo permanent part of the cabin.
For access, the panel swings out, hinged on the right side adjacent to the
glove box. Fuse/ relay panel is behind, and it also swings out to access
contactor, volt regulator and wirebundle.
Roger Baalman
rbaalman at cox.net
>
> >It is very quied on the net? or something is wrong, or everybody is
> >very bussy with building or flying.
> >Stef
> >-++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> I've been busy doing the annual inspection on my KR and disassembling
> a second 0-200 to do a rebuild and eventually an engine
> swap. Weather is warming now so it's about flying season
> again. Yeee Haaaa.......
>
> Larry Flesner
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: KR2 panel.jpg
Type: image/pjpeg
Size: 129673 bytes
Desc: not available
URL:
<http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20150319/760296f6/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: KR2 suppanel.jpg
Type: image/pjpeg
Size: 45416 bytes
Desc: not available
URL:
<http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20150319/760296f6/attachment-0001.jpg>
