I had a few nuts get blocked with resin and flox after attaching the aileron 
spar to the wing. After the resin set I used a 3/32" drill bit to cut through 
the bulk of the overfill then used a tap to clean out the threads. Minimal 
amount of effort. 

Dan Prichard 
Portland Oregon 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_6212.JPG
Type: image/jpeg
Size: 34743 bytes
Desc: not available
URL: 
<http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160102/80041989/attachment.JPG>
-------------- next part --------------



Sent from my iPhone

Reply via email to