RE: Sound like it would work to you guys? You had to ask, didn't you? Who knows if it will or won't. Probably, but what do you have against wood? What it really sounds like to me, is, A LOT OF WORK.
N64KR Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KR builders and pilots List-Post: krnet@list.krnet.org Date: Friday, July 11, 2003 10:42:08 AM To: KR builders and pilots Subject: Re: KR>My KR2S As you might not know is that im not using typical plywood skins. I will be using fiberglass skins in a sandwhich form meaning im putting foam inbetween the wood. I will varnish the entire airplane but only one coat on the outsides that is sanded. Remember the fiberglass will bond to the foam extremly well and the wood but say my wood isnt correct in some place, I will fill the gap using flox which is stronger than the wood. Sound like it would work to you guys? Justin ----- Original Message ----- From: "Mark Jones" <flyk...@wi.rr.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Friday, July 11, 2003 6:18 AM Subject: Re: KR>My KR2S > Justin. > In the photo of your boat you state you are varnishing the wood. Do not > varnish it until you have skinned it, and completed the plywood gussets > around the main spar, added your rear bulkhead, etc. If you do, you will not > get a good bond between the frame and skins. You are going to have to do a > lot of sanding to get back to bare wood to skin the frame. > > Mark Jones (N886MJ) > Wales, WI USA > E-mail me at flyk...@wi.rr.com > Visit my KR-2S CorvAIRCRAFT web site at > http://mywebpage.netscape.com/n886mj/homepage.html > > > ----- Original Message ----- > From: "Justin" <jmw...@socal.rr.com> > To: "KR builders and pilots" <kr...@mylist.net> > Sent: Friday, July 11, 2003 12:46 AM > Subject: Re: KR>My KR2S > > > > http://www.geocities.com/attngrabber14/kr2s.html > > > > Forgot the link > > ----- Original Message ----- > > From: "Justin" <jmw...@socal.rr.com> > > To: <kr...@mylist.net> > > Sent: Friday, July 11, 2003 12:46 AM > > Subject: KR>My KR2S > > > > > > Here is a link to my website. I just bought a digital camera and took a > few > > pictures of my project with it. I had a bad experience with a normal > camera, > > the film place LOST my film which included all of my construction photo's > on > > it so this digital camera will prevent that. > > > > Justin > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
