RE: Wouldn't peel ply work better at minimizing pin holes and absorbing extra resin at the same time?
Yes, indeed it would. The only thing about peel ply is that you cannot use it on compound curves, but everywhere else, it is great. N64KR Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KR builders and pilots List-Post: krnet@list.krnet.org Date: Monday, July 14, 2003 9:05:03 AM To: KR builders and pilots Subject: Re: KR>Pin holes Brian Kraut wrote: >I have done a few repairs and I usually put vacuum bagging film over >them or sometimes just tape right over a small repair with plastic >packing tape. There is almost no sanding to do when you do that. The >only disadvantage I can see is that you wind up with resin filling the >weave on the top instead of squeeging out the excess and later filling >with micro or something lighter than pure resin. Wouldn't peel ply work better at minimizing pin holes and absorbing extra resin at the same time? Ameet Savant asav...@notes.state.ne.us _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
