Mark, a ,an6-6a is a 3/8'sx3/16th grip length, undrilled, you probably need a an6-7a with a couple washers which is 3/8 dia. x 5/16 grip length undrilled . for the aft spar bolts an3-6 with washers , 3/16 dia x 3/8 grip length you should insure that none of the threads are in side the fittings. These can be found at Aircraft Spruce ,their catalog is free when you order and the info is on page 74 or somewhere close to that ----- Original Message ----- From: Mark Langford To: KR builders and pilots Sent: Monday, October 20, 2003 8:42 PM Subject: Re: KR>Bolt question
Tim Boyer wrote: > Does anyone have the part number for these bolts or > correct size I'm turning gray trying to get this right AN6-6A for the big ones, AN3-5A for the small ones Mark Langford, Huntsville, AL N56ML "at" hiwaay.net see KR2S project at http://home.hiwaay.net/~langford _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html