Thanks Jim---------Someone told me the power wire to the radio needs to be sheilded as the eng noise is conducted through the radio via this wire??????????
On Sat, 12 Jun 2004 20:20:57 -0500 "JIM VANCE" <va...@claflinwildcats.com> writes: > The auto plugs should have an R in the number. These are the > resistor version of the standard plugs and will greatly reduce radio > interference (Rotax changed their plugs to resistor type for this > reason). If all else fails, buy some metal braid that is used for > grounding straps, etc. Put it over the ignition wires from the plug > to the distributor/magneto. Use heat shrink tubing at each end. > Ground just one end of each wire at the distributor. If you ground > both ends, then you have a conductor rather than a shield and it > won't work. > > I've done these two things to the Rotax 582 in my Renegade. I can > hear people in the pattern at airports a hundred miles away. > > Jim Vance > va...@claflinwildcats.com > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
