I welded small steel blocks to the intake manifolds just before they bent and went into the cylinder. I tapped them and put in the primer fittings. I think there are some pictures on my web site at www.engalt.com/kr2.htm. Sorry, too busy to check myself at the moment. If not there let me know and I will send you pics.
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of jsmon...@aol.com Sent: Monday, September 13, 2004 4:35 PM To: kr...@mylist.net Subject: KR> Primer lines to Engine Can anyone please tell me where the primer lines should enter the engine? I think I have seen a picture recently but can't find it that showed the primer lines entering the intake log. Also what size hole and thread size should be used? Thanks, John Monday KR2S Laguna Beach, CA _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
