Has anyone built the outboard panels without them being attached to the
center section, it seems it would be easier to work with if a jig was
built to maintain the twist and just build them on a table.
thanks
Jim
On Fri, 20 Feb 2004 12:39:02 -0700 (Mountain Standard Time) "gleone"
<gle...@rtconnect.net> writes:
> Yes, they will be bolted to the center spars when I build the second
> set of
> wings. That is the reason for protecting the wing stubs with peel
> ply or
> waxed paper.
>
> Gene Leone, Worland, Wyoming.
>
>
> -------Original Message-------
>
> From: JAMES FERRIS
> Date: 10/29/04 12:17:24
> To: kr...@mylist.net
> Subject: Re: KR> kr wing sets
>
> Are you building the outboard panels attached to the center or
> building
> them separate, detached from the center section?
> Thanks
> Jim
> On Fri, 20 Feb 2004 05:38:40 -0700 (Mountain Standard Time)
> "gleone"
> <gle...@rtconnect.net> writes:
> > Don,
> >
> > It's really simple. Using wax paper (or peel ply), cover the
> stubs
> > and tape
> > in place using gorilla tape or waxed paper. Then, build your
> outer
> > wings as
> > normal. Once the fiberglass work is done, cut as per plans. The
> > peel ply
> > or waxed paper will protect the stub from any "splash over". If
> > you're
> > concerned about the WAF's being dripped on by the resin, cover
> the
> > exposed
> > part liberally with Johnson's Turtle Wax. I'm building the KR-1
> > /-1B.
> > Right now I'm building the -1 wings but come spring, I'll be
> > building the
> > -1B wings. And in both cases, I'm using the 5046 airfoil. Enjoy!
> >
> > Gene Leone, Worland, Wyoming
> >
> >
> > -------Original Message-------
> >
> > From: Don Chisholm
> > Date: 10/29/04 04:53:59
> > To: gle...@rtconnect.net
> > Subject: KR> kr wing sets
> >
> > has anyone figured how to build wing sets separately
> > _______________________________________
> > to UNsubscribe from KRnet, send a message to
> krnet-le...@mylist.net
> > please see other KRnet info at http://www.krnet.org/info.html
> >
> > _______________________________________
> > to UNsubscribe from KRnet, send a message to
> krnet-le...@mylist.net
> > please see other KRnet info at http://www.krnet.org/info.html
> >
> >
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
