Gav The KR2 (not S) centre main spar is 83" long and the centre rear spar is 84" long. To run your 48" template at right angles on the end of the former will place it 1/2" in from the end of the rear on each side. The difference in spar length compensates for the fact that the rear outer spar sweeps forward and allows for the bends in the outer rear WAFs to align in parallel with the inner rear WAFs. In my view you need a 48" ply template at right angles to the main spar both on the outer end of the centre section and another on the inner end of the wing. They are essential when it comes to sanding down your foam to shape with a very long board.
Regards John The Martindale Family 29 Jane Circuit TOORMINA NSW 2452 AUSTRALIA phone: 61 2 66584767 email: johnja...@optusnet.com.au ----- Original Message ----- From: "GavinandLouise" <gdono...@bigpond.net.au> To: "KRnet" <kr...@mylist.net> Sent: Monday, December 13, 2004 5:49 PM Subject: Re: KR> kr wings > Yes you have read properly, and no I haven't added the foam and glass to the > so called butt end of the centre section as yet. maybe I should do that and > that will fix my problem. > It's just that the plans call for the ply rib to be used as the guide and it > also says that the rib should be a little way in from the end as well, which > doesn't work out. > > Gav > > . > > I hope I read Your problem correctly > > Don Chisholm chizmsupholst...@rogers.com > > > > _______________________________________ > > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > > > please see other KRnet info at http://www.krnet.org/info.html > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html
