Mark, If you find someone who will drill those for you, I'd like to know as I have checked with a couple prop makers and they would not do it for me. I talked personally with Ed Sturba, and he said he'd only double drill props he had made. I also checked with Ted Hendrickson, here locally and he said he is fully retired. The people he sold his business to back east folded. The prop I have is a 52 x 50 Hendrickson drilled for SAE 1. I was going to initially try to use this one on the Type 4 engine I have, but Ideally will probably be better off with a 52 x 54 drilled for VW. Mark are the props you have listed on your web site. I might just order a new prop from Ed and then make this SAE one I have available for loaning if I can't get it drilled. Bud Midkiff Lynnwood, WA email: c.midk...@verizon.net
----- Original Message ----- From: "Mark Jones" <mjo...@muellersales.com> To: "CorvAircraft (E-mail)" <corvaircr...@mylist.net>; "KR Net (E-mail)" <kr...@mylist.net> Sent: Friday, December 17, 2004 7:31 AM Subject: KR> Props >I have a couple of VW props that I was thinking about having SAE-1 bolt > pattern drilled into them. This would allow us to test the prop on both VW > and Corvair. What are your thoughts on having two bolt patterns on the > same > prop? > > Mark Jones (N886MJ) > Wales, WI > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html >
