Louis Sorry I think we are at cross purposes! I am building a KR2S which has 12" wing extensions. The drawing shows a 33" rib at the end of the wing before the extension starts. I think you have answered my question though as I think this rib takes the place of the 36" tip rib shown on the old KR2 plans. Thank you Peter ----- Original Message ----- From: "Louis Staalberg" <n...@cbiwireless.com> To: "KRnet" <kr...@mylist.net> Sent: Sunday, June 12, 2005 4:19 AM Subject: Re: KR> WAFs/Outboard ribs.reply
> To Peter Drake. > > O.K. Peter, lets try this: > If you stand at the tip of the wing, looking towards the fuselage, the > first rib you see is a 3/8 wooden rib. > That one is 36 inches long.Let us label that one "A" > > The next rib you will see is made out of 2 inch foam (B) > > The next rib (C) is also made out of 2 inch foam. > > (D) is also 2 inch foam > > (E) however is just 1 inch foam > . > (F) and (G) are wooden ribs, 48 inches long and are part of the center > wing. > > (B), (C) and (D) are equilly spaced > > You then put a very straight board with sand paper attached on (A) and > (F) > and start sanding and sanding and sanding.! > > When finished, the ribs (B), (C), (D) and (E) will have just the right > shape. > > Hope this helps, good luck. If you have more questions, feel free to > contact me off line. > > > > Louis Staalberg > Payson, Arizona > n...@cbiwireless.com > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > --- > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 11/06/2005 > >
