What kind of foam are you going to hot wire ?? Virg On Tue, 09 May 2006 08:41:05 -0600 "Jerry Morris" <jerry.mor...@nsc.com> writes: > I want to hot wire the 18% tapering to 15% but only four feet at a > time. > how do i come up with the middle airfoil? > if the section was 8' what would the 4' airfoil be, 16.5%? > do i take the 15% and 18% airfoil and average the size between them > in cord and curves? > > thanks > jerry > > > > >Message: 3 > >Date: Mon, 08 May 2006 09:21:42 -0500 > >From: Steve Eberhart <st...@newtech.com> > >Subject: Re: KR> Spar wood > >To: KRnet <kr...@mylist.net> > >Message-ID: <445f53f6.80...@newtech.com> > >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > >I am not sure, from reading all of the posts in this thread, if a > >constant 18% thick wing is what is being discussed here or an 18% > >tapering to 15%. The 18% AS5048 was originally designed to be used > as > >the root airfoil of a wing that tapered to the 15% AS5045 airfoil > at the > >tip. According to Ashok, the 15% and 16% airfoils are well suited > for > >use in single airfoil wings. I don't remember any discussions > about > >using the 18% in any configuration other than as a root airfoil > tapering > >to a 15% at the tip. > > > >Steve Eberhart > >Building an RV-7A but I still have the original AS504x wind tunnel > > >models in the attic. > > > > > > > > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
