I can relate to this company. I use to test polyurethane foam for building products and insulated structures. We made structural insulated building panels. We ran torsion test, compressive stress, shear stress, curing time test, aging test, degradation test, adhesion test, peal tests, and "U" value test. For those how think there is no difference in foam chemistry, they are wrong. This Mfgr. looks good to me. Thanks for the info.
Ronald R. Eason Sr. President / CEO Ph: 816-468-4091 Fax: 816-468-5465 http://www.jrl-engineering.com Our Attitude Makes The Difference! -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of George Sent: Tuesday, May 30, 2006 10:00 PM To: KRnet Subject: Re: KR> This is a good thing... Check General Plastics (www.generalplastics.com) they have up to 50lb density foam suppose less expensive than REN. Brian Kraut wrote: >I went to a composite kit manufacturer's shop for a job interview last year. >They had a huge gantry that they used to CNC cut the prepreg graphite that >they used in their molds. Just cut out a bunch of fabric pieces, slap them >in the mold, but on the vacuum bagging film and slap them in the oven. > >They also had a huge CNC gantry machine that they used to cut a very rigid >foam that they made their molds with. I spoke to them about doing a mold >for the new airfoil wing skins, but it is pretty expensive. Just the foam >alone was a few thousand dollars. > >Brian Kraut >Engineering Alternatives, Inc. >www.engalt.com > >-----Original Message----- >From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On >Behalf Of D F Lively >Sent: Tuesday, May 30, 2006 5:48 PM >To: KRnet >Subject: Re: KR> This is a good thing... > > >Steve: > >If you have access to a plotter and replace a pen with a carefully set up >cutter( some plotters have them redy made) you can cut stickers, paint mask >and the like. That is how they make the painting Mask for the big boys! I >went thru Douglas aircraft in long Beach while in school and watched them >make one fore a DC-10. > >Don > ------------------------------------------------------------------------ > >3343V wrote: > > > >>bo...@hatconversions.com wrote: >> >> >>>Steve, >>> We use a router table to cut and also engrave aluminum for these >>>custom Vet trucks. It will amaze you all the things you can use it >>>for if you buy a sign engraving program. Bobby >>> >>> >>That's another thing I want to do with it. Vinyl stickers, too, but that >>will take some experimentation to work out how to cut it. >>-- >>Steve >>33...@swbell.net >>N3343V- '75 C150M >>N205FT- KR1 #6170 >>He who seeks will find, and he who knocks will be let in. >> >>_______________________________________ >>Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >>to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >>please see other KRnet info at http://www.krnet.org/info.html >> >> >_______________________________________ >Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html > > > >_______________________________________ >Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html > > > > > _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
