Dustin, I would like a copy too, please.
John in El Paso In a message dated 11/12/2010 1:36:58 P.M. Mountain Standard Time, cgardn...@rogers.com writes: Dustin, I have some sketches that came from Don Betchan and will send them to you. Regards Chris Gardiner. -----Original Message----- From: krnet-bounces+cgardn628=rogers....@mylist.net [mailto:krnet-bounces+cgardn628=rogers....@mylist.net] On Behalf Of dustin Reves Sent: Wednesday, November 10, 2010 9:32 PM To: KRNET LIST POST Subject: KR> Don betchans retracts and fuse side questions. Does anyone have any pictures(aside from the ones on marks website) of how they retracted? Did don have to modify the spar to them to retract properly? Is the entire system mounted spar foreward? I cant make it out from the photos on langford's site. Also >From what I have been reading most KR fuse sides are wider at the shoulders than they are at the bottom, is this correct? Would it incur any significant increase in work to make them the same width top and bottom? I bought Mike Arnold's AR-5 DVD's and from what I understand that played a big part in lowering interference drag between the fuse and wing. Also, putting the widest part of the fuselage at the trailing edge of the wing. am I silly to think this is the way to go with a KR as well? _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
