I used .065 Aluminum from Spruce and several hole saws from Lowes on my
first panel.  That worked out OK, but I have had the next two water cut by a
machine shop owned by one of our EAA members.  I had the Aluminum, and I
think it still cost me around $200.  He said that most of the cost was in
the setup, so cut 2 for the same price.  And, I gave him the CAD file to
start with.  The good thing about doing it that way, is that if you want to
change it later, they still have the file and can easily make the changes.
I wish I knew about the place that Mark recommended cause I am sure that I
paid too much.

See N64KR at http://KRBuilder.org - Then click on the pics 
See you at the 2011 - KR Gathering in Mt. Vernon, Il - MVN
There is a time for building and it never seems to end.
Daniel R. Heath - Lexington, SC

-----Original Message-----

After a nerve racked morning with a fly cutter I have determined that I am
probably not going the be able to cut the instrument holes.  

Reply via email to