I made a custom panel for a D model Bonanza once upon a time and just used a drill press and 3-1/8, 2-1/4 hole saws then swirl polished it with round wire brush. Turned out ok Ken Gallaher
On Mon, Jan 3, 2011 at 10:32 AM, smwood <[email protected]> wrote: > >After a nerve racked morning with a fly cutter I have determined that I am > >probably not going the be able to cut the instrument holes. Another > option > >is a Greenlee punch but those are quite expensive unless someone has one > to > >loan. With all that said I am thinking that I want to mark up a piece of > >.125 aluminum sheet and send it off to someone to laser cut. Any > >suggestion on who could do that for me? > > Thanks > Craig > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > I used a fly cutter for the one 3-1/8 hole for the Dynon D10A; small hole > saws for the three little gauges; twist drills for the switches and screws. > My panel is the stock RR forward deck/instrument panel. I used a .040" > aluminum sheet backing up the fiber glass for a ground and EMI shield. All > round holes were cut on the drill press. Use a 2x6 to backup the fly > cutter > and hole saw, and do clamp everything down firmly. Rectangular holes were > cut with a Dremel tool fitted with rotary zip saw bits and a router adapter > ($8 at Lowe's). Yes, they make bits for aluminum, something like $6 at > Lowe's. That was my specific out of pocket cost to cut the panel. To cut > a > straight line with the Dremel, clamp an aluminum angle or straight board to > the panel offset from the cut line for the router base. Granted, my cuts > are not CNC precise, but it only cost $6 for two bits plus my time. Pays > your money and takes your choice. > > Sid Wood > Tri-gear KR-2 N6242 > Mechanicsville, MD, USA > [email protected] > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >

