Mark No, not too crazy!!!
Don't you have to be on edge to do this anyway? Besides with your flair for the new and untried an easier way to sculpt your airfoil is in there. That is one reason I pick the KR. So much you can do to your own music My dihedral will start inside the fuselage and I want to cut/sand it all at one time if I can get away with it. I just do not want to ruin allot of foam. End up patching and filling. Having to wait until spring to start my barn/garage to build in, and with holes wearing through my plans from leafing, ones mind wanders. Besides, I think it will work out, plus others could borrow the machine. It would scale easily. ----- Original Message ----- From: "Mark Langford" <m...@n56ml.com> To: "KRnet" <kr...@mylist.net> Sent: Sunday, January 02, 2011 10:46 PM Subject: Re: KR> Foam cutting large scale > Don't go too crazy guys. With some 36 grit sandpaper glued to an aluminum > angle, you can probably sand both wings completely to shape in 2-3 hours. > That's probably less time than we've killed dreaming up a "better" way to > do > it. I thought of a "better" way to do it with the internal fiberglass > skin, > and I spent a lot of time doing it....but I'm not sure it was worth the > extra time. Do what's worked for others and get on with the job...
