I would like some advice how to build a wing with a fuel tank inside that's
aluminum my wing was built with foam ribs no plywood ribs I want to run a
tank behind the main spar about 5 and a half feet I would appreciate ideas
how to fasten the tank and how to build the wing I have no rib designs are
templates that came with my set of plans does anyone have a rib pattern for
a kr2 .l submitted a prior mailing and am not sure it sent thanks dean
Choitz dscho...@yahoo.com
Sent via Android by Nex-Tech Wireless.
-----Original message-----
From: krnet-requ...@mylist.net
To: kr...@mylist.net
Sent: Sat, Oct 20, 2012 04:00:15 GMT+00:00
Subject: KRnet Digest, Vol 354, Issue 297
Send KRnet mailing list submissions to
kr...@mylist.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mylist.net/listinfo/krnet
or, via email, send a message with subject or body 'help' to
krnet-requ...@mylist.net
You can reach the person managing the list at
krnet-ow...@mylist.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of KRnet digest..."
Today's Topics:
1. Fuel Sight Gages (Neal)
2. annaversary (joe.kr2s.buil...@juno.com)
3. Pin out (PatS)
----------------------------------------------------------------------
Message: 1
List-Post: krnet@list.krnet.org
Date: Fri, 19 Oct 2012 15:54:48 -0400 (GMT-04:00)
From: Neal <lt1corve...@earthlink.net>
Subject: KR> Fuel Sight Gages
To: kr...@mylist.net
Message-ID:
<4468560.1350676488970.javamail.r...@elwamui-cypress.atl.sa.earthlink.net>
Content-Type: text/plain; charset=UTF-8
For those of you that are or will be making your own fuel sight gages, U.S.
Plastic Corp. here in Lima, Ohio has all of the types of tubing that have
recently been discussed. Their web addres is www.usplastic.com. The clear
Superthane Ether clear plastic tubing mentioned in an article on how to make
a sight gage is available for $.50 foot with a 10 foot minimum (part
#56499). I know I'll have some left over since I'm only going to use maybe
a foot or less but $5.00 is no big deal. It's available mail order. They
also have clear tygon tubing for those so inclined to use a little more
flexible tubing.
Check them out as they also have nice graduated beakers that I use for
mixing Epoxies for fiberglassing. Lots of other products that some of you
might find useful during construction.'
Neal Hornung (KR2 - N776DJ) currently painting and sanding and sanding and
sanding.
Lima, Ohio
------------------------------
Message: 2
List-Post: krnet@list.krnet.org
Date: Fri, 19 Oct 2012 23:48:26 GMT
From: "joe.kr2s.buil...@juno.com" <joe.kr2s.buil...@juno.com>
Subject: KR> annaversary
To: corvaircr...@mylist.net, kr...@mylist.net
Message-ID: <20121019.194826.1474...@webmail07.dca.untd.com>
Content-Type: text/plain; charset=windows-1252
Hey guys,I got in a short flight tonight after work to celebrate the 7th
year of flying N357CJ. I had to do it between rain and dark but got her
done. I landed with exactly 760 hours and I just checked the log book which
shows just shy of 1000 landings. Life is great.Joe Horton, coopersburg , PA
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.juno.com/TGL3141/5081e7123ccb767124c89st04duc
------------------------------
Message: 3
List-Post: krnet@list.krnet.org
Date: Fri, 19 Oct 2012 21:42:29 -0500
From: "PatS" <psh...@bayspringstel.net>
Subject: KR> Pin out
To: "Corvair Forum" <corvaircr...@mylist.net>, "KRnet"
<kr...@mylist.net>
Message-ID: <C24CE06CA8D94D1AA5FCBDAD892B396A@MYPC>
Content-Type: text/plain; charset="iso-8859-1"
Guys; Any one got a pin out for a Terra TXN 960? Could use same to check
unit out. Thanks
IHS
PatS
Seminary, MS
------------------------------
_______________________________________________
See KRnet list details at http://www.krnet.org/instructions.html
End of KRnet Digest, Vol 354, Issue 297
***************************************
