Cam Macdonell wrote:
I just tried it and it worked. I used fc7 2.6.21 kernel, 64 bits for the guest.Dor Laor wrote: >>> You need to open the unix socket you passed to the vmchannel >>> parameter. >>> An easier alternative is to use -vmchannel di:2258,tcp:// >>> 0:4444,server. >>> Before the guest loads you'll need to telnet the 4444 port and then >>> you should receive the >>> hello world output once the driver is up. >>> -Dor >> I tried having a program listening on the unix domain socket. >> Actually, the VM won't even start until a program connects to the >> socket. I didn't get the message with my listening program, but I'll >> try the telnet method as I haven't programmed a socket in a while so >> I may have missed a step. > > Go for it, its 1 minute effort. Hi Dor, It didn't work. I used the following option: -vmchannel di:2258,tcp:0:4444,server (the // confused kvm) and when the VM booted, I connected with "telnet localhost 4444" which allowed the boot to proceed. But, I didn't get the hello host message when I loaded the hypercall module. dmesg did show that the module loaded successfully. I'll dig around with it and see what else I can figure ou
Can you send the relevant dmesg?
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel
