I did not have any better luck with the e1000 or pcnet nics when running kvm-61. I'll try again with kvm-63 and get back to you.
david Avi Kivity wrote: > david ahern wrote: >> Try adding the noapic option to your guest kernel. I re-ran that test >> on kvm-62 >> and my VM was able to run under load for more than 3-1/2 days (the >> network never >> locked up; I stopped the test to try other variations). >> >> One side effect of the noapic option is that irq balancing is disabled >> -- all >> interrupts are delivered via CPU 0. I ran a few tests earlier this >> week without >> the noapic option (hence with the apic) but with irq balancing >> disabled and >> still had the lockups. It seems to be something specific to the apic. >> >> > > I got good results with apic and e1000. Can you try it? > > May be a guest driver bug. > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-devel mailing list kvm-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-devel