Hello James,
On 3/7/2017 4:37 AM, James Morse wrote:
On 06/03/17 20:44, Tyler Baicar wrote:
ARM APEI extension proposal added SEA (Synchronous External Abort)
notification type for ARMv8.
Add a new GHES error source handling function for SEA. If an error
source's notification type is SEA, then this function can be registered
into the SEA exception handler. That way GHES will parse and report
SEA exceptions when they occur.
An SEA can interrupt code that had interrupts masked and is treated as
an NMI. To aid this the page of address space for mapping APEI buffers
while in_nmi() is always reserved, and ghes_ioremap_pfn_nmi() is
changed to use the helper methods to find the prot_t to map with in
the same way as ghes_ioremap_pfn_irq().
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index d178dc0..b2d57fc 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -41,6 +41,8 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <acpi/ghes.h>
+
static const char *fault_name(unsigned int esr);
#ifdef CONFIG_KPROBES
@@ -498,6 +500,17 @@ static int do_sea(unsigned long addr, unsigned int esr,
struct pt_regs *regs)
pr_err("Synchronous External Abort: %s (0x%08x) at 0x%016lx\n",
fault_name(esr), esr, addr);
+ /*
+ * Synchronous aborts may interrupt code which had interrupts masked.
+ * Before calling out into the wider kernel tell the interested
+ * subsystems.
+ */
+ if (IS_ENABLED(ACPI_APEI_SEA)) {
IS_ENABLED() needs the CONFIG_ version of the symbols, otherwise this doesn't
get built.
(I guess the testing from the previous always-enabled version is still valid)
Okay, I will use CONFIG_ACPI_APEI_SEA in the next patch set.
+ nmi_enter();
+ ghes_notify_sea();
+ nmi_exit();
+ }
+
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = 0;
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index b0140c8..c545dd1 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -39,6 +39,21 @@ config ACPI_APEI_PCIEAER
PCIe AER errors may be reported via APEI firmware first mode.
Turn on this option to enable the corresponding support.
+config ACPI_APEI_SEA
+ bool "APEI Synchronous External Abort logging/recovering support"
+ depends on ARM64 && ACPI_APEI && ACPI_APEI_GHES
Nit: ACPI_APEI_GHES already depends on ACPI_APEI
I can remove ACPI_APEI here then.
+ default y
+ help
+ This option should be enabled if the system supports
+ firmware first handling of SEA (Synchronous External Abort).
+ SEA happens with certain faults of data abort or instruction
+ abort synchronous exceptions on ARMv8 systems. If a system
+ supports firmware first handling of SEA, the platform analyzes
+ and handles hardware error notifications from SEA, and it may then
+ form a HW error record for the OS to parse and handle. This
+ option allows the OS to look for such hardware error record, and
+ take appropriate action.
+
config ACPI_APEI_MEMORY_FAILURE
bool "APEI memory error recovering support"
depends on ACPI_APEI && MEMORY_FAILURE
Reviewed-by: James Morse <james.mo...@arm.com>
Thanks!
Tyler
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm