On Tue, 9 Mar 2021 15:46:29 +0000 Alexandru Elisei <[email protected]> wrote:
Hi, > Hi Andre, > > This is a really good idea, thank you for implementing it! > > Some comments below. > > On 2/25/21 12:59 AM, Andre Przywara wrote: > > The hardcoded memory map we expose to a guest is currently described > > using a series of partially interconnected preprocessor constants, > > which is hard to read and follow. > > > > In preparation for moving the UART and RTC to some different MMIO > > region, document the current map with some ASCII art, and clean up the > > definition of the sections. > > > > No functional change. > > > > Signed-off-by: Andre Przywara <[email protected]> > > --- > > arm/include/arm-common/kvm-arch.h | 41 ++++++++++++++++++++++--------- > > 1 file changed, 29 insertions(+), 12 deletions(-) > > > > diff --git a/arm/include/arm-common/kvm-arch.h > > b/arm/include/arm-common/kvm-arch.h > > index d84e50cd..b12255b0 100644 > > --- a/arm/include/arm-common/kvm-arch.h > > +++ b/arm/include/arm-common/kvm-arch.h > > @@ -7,14 +7,33 @@ > > > > #include "arm-common/gic.h" > > > > +/* > > + * The memory map used for ARM guests (not to scale): > > + * > > + * 0 64K 16M 32M 48M 1GB 2GB > > + * +-------+-..-+-------+-------+--....--+-----+--.....--+---...... > > + * | (PCI) |////| int. | | | | | > > + * | I/O |////| MMIO: | Flash | virtio | GIC | PCI | DRAM > > + * | ports |////| UART, | | MMIO | | (AXI) | > > + * | |////| RTC | | | | | > > + * +-------+-..-+-------+-------+--....--+-----+--.....--+---...... > > + */ > > Nitpick: I searched the PCI Local Bus Specification revision 3.0 (which > kvmtool > currently implements) for the term I/O ports, and found one mention in a > schematic > for an add-in card. The I/O region is called in the spec I/O Space. Right, will change that. > I don't know what "int." means in the region for the UART and RTC. It was meant to mean "internal", but this is really nonsensical, so I will replace it with "plat MMIO". > The comment says that the art is not to scale, so I don't think there's any > need > for the "..." between the corners of the regions. To my eyes, it makes the > ASCII > art look crooked. fixed. > The next patches add the UART and RTC outside the first 64K, I think the > region > should be documented in the patches where the changes are made, not here. > Another > alternative would be to move this patch to the end of the series instead of > incrementally changing the memory ASCII art (which I imagine is time > consuming). You passed the scrutiny test ;-) I noticed this last minute, but didn't feel like changing it then. Have done it now. > > Otherwise, the numbers look OK. > > > + > > #define ARM_IOPORT_AREA _AC(0x0000000000000000, UL) > > -#define ARM_FLASH_AREA _AC(0x0000000002000000, UL) > > -#define ARM_MMIO_AREA _AC(0x0000000003000000, UL) > > +#define ARM_MMIO_AREA _AC(0x0000000001000000, UL) > > The patch says it is *documenting* the memory layout, but here it is > *changing* > the layout. Other than that, I like the shuffling of definitions so the > kvmtool > global defines are closer to the arch values. I amended the commit message to mention that I change the value of ARM_MMIO_AREA, but that stays internal to that file and doesn't affect the other definitions. In fact I imported this header into a C file and printed all externally used names, before and after: it didn't show any changes. Cheers, Andre > > #define ARM_AXI_AREA _AC(0x0000000040000000, UL) > > #define ARM_MEMORY_AREA _AC(0x0000000080000000, UL) > > > > -#define ARM_LOMAP_MAX_MEMORY ((1ULL << 32) - ARM_MEMORY_AREA) > > -#define ARM_HIMAP_MAX_MEMORY ((1ULL << 40) - ARM_MEMORY_AREA) > > +#define KVM_IOPORT_AREA ARM_IOPORT_AREA > > +#define ARM_IOPORT_SIZE (1U << 16) > > + > > + > > +#define KVM_FLASH_MMIO_BASE (ARM_MMIO_AREA + 0x1000000) > > +#define KVM_FLASH_MAX_SIZE 0x1000000 > > + > > +#define KVM_VIRTIO_MMIO_AREA (KVM_FLASH_MMIO_BASE + > > KVM_FLASH_MAX_SIZE) > > +#define ARM_VIRTIO_MMIO_SIZE (ARM_AXI_AREA - \ > > + (KVM_VIRTIO_MMIO_AREA + ARM_GIC_SIZE)) > > > > #define ARM_GIC_DIST_BASE (ARM_AXI_AREA - ARM_GIC_DIST_SIZE) > > #define ARM_GIC_CPUI_BASE (ARM_GIC_DIST_BASE - ARM_GIC_CPUI_SIZE) > > @@ -22,19 +41,17 @@ > > #define ARM_GIC_DIST_SIZE 0x10000 > > #define ARM_GIC_CPUI_SIZE 0x20000 > > > > -#define KVM_FLASH_MMIO_BASE ARM_FLASH_AREA > > -#define KVM_FLASH_MAX_SIZE (ARM_MMIO_AREA - ARM_FLASH_AREA) > > > > -#define ARM_IOPORT_SIZE (1U << 16) > > -#define ARM_VIRTIO_MMIO_SIZE (ARM_AXI_AREA - (ARM_MMIO_AREA + > > ARM_GIC_SIZE)) > > +#define KVM_PCI_CFG_AREA ARM_AXI_AREA > > #define ARM_PCI_CFG_SIZE (1ULL << 24) > > +#define KVM_PCI_MMIO_AREA (KVM_PCI_CFG_AREA + ARM_PCI_CFG_SIZE) > > #define ARM_PCI_MMIO_SIZE (ARM_MEMORY_AREA - \ > > (ARM_AXI_AREA + ARM_PCI_CFG_SIZE)) > > > > -#define KVM_IOPORT_AREA ARM_IOPORT_AREA > > -#define KVM_PCI_CFG_AREA ARM_AXI_AREA > > -#define KVM_PCI_MMIO_AREA (KVM_PCI_CFG_AREA + ARM_PCI_CFG_SIZE) > > -#define KVM_VIRTIO_MMIO_AREA ARM_MMIO_AREA > > + > > +#define ARM_LOMAP_MAX_MEMORY ((1ULL << 32) - ARM_MEMORY_AREA) > > +#define ARM_HIMAP_MAX_MEMORY ((1ULL << 40) - ARM_MEMORY_AREA) > > + > > > > #define KVM_IOEVENTFD_HAS_PIO 0 > > _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
