Check your com ports If you have a IRQ conflict the com port will not work properly
You should be able to see com 1,2,3,4 open if busy then another program has NOT released it Wolfgang NTC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim McAtee Sent: Tuesday, September 25, 2007 5:43 PM To: [email protected] Subject: KX-T: Can't program TVS200 via serial port I must be missing something. For some reason I can no longer get into the serial port programming of a TVS200 VPS. If I connect a serial cable and cycle the power of the TVS200 I see the usual startup output in Hyperterminal: CARD TEST ... SYSTEM SETUP ... some additional screen output, and then ** ONLINE MODE ** and I get a prompt: > But I can't get the programming menu to appear. I thought you just banged the 'Enter' key a couple times. Or is there something else that needs to happen? _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.13.30/1029 - Release Date: 9/24/2007 7:09 PM _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
