I do something similar by using up a Group Button for the ICD Group and changing the ring for that button. Maybe you could turn off the ring for the individual CO buttons. They would flash and you would hear the ring from the Group button.
When you say "transferred call", I assume you mean the receptionist transfers the call. A transferred call should ring on the INTERCOM first. I hope this helps. Thanks, Marc Halberg The Phone Man La Jolla, CA USA 800-878-PHON www.ephoneman.com [EMAIL PROTECTED] -----Original Message----- From: Jody C [mailto:[EMAIL PROTECTED] Sent: Monday, October 08, 2007 1:17 PM To: Erling Lassesen; [email protected] Subject: Re: KX-T: Different ringing tone This is not a forwarded call It is part of a ICD group Changing the ringing tone is not an option as that changes the ringing tone for all of the calls Maybe your suggestion of an analogue port with a bell could sort the problem I will give it a try Jody On 08/10/2007 21:12, "Erling Lassesen" <[EMAIL PROTECTED]> wrote: > This is not a forwarded call. > > Check the display on the 7665's. This may be your only chance. > > You can change the ring tones for CO lines on the 7665's, but your options > are limited to 8. If there is one phone in the bar, I would use the 7630 > which can provide up to 30 ring tones. > > If you are using POTS phones, you may have a problem. Your only chance then > is to use an external ringer with an analog port programmed for the other > incoming lines. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > Jody C > Sent: Monday, October 08, 2007 1:06 PM > To: [email protected] > Subject: KX-T: Different ringing tone > > Hi all > > I have a KXTDDA 200 (UK version) with a fractional primary rate ISDN line > connected, 40 X 7665 & 32 SLT > > The incoming ringing goes to the first ICD group which rings the reception > phone first and then after 5 seconds rings the phones in the bars upstairs > > All of this works fine but the customer wants some way for the staff to know > that the call ringing is being forwarded from the reception phone and not a > direct call into the bar > > Some form of different ring tone or the call appearing on a different button > would work but because the line is a fractional rate all the lines are in > the same group and cant be assigned to a different group. > > Anyone any ideas how I can get these calls to ring differently? > > Any help would be appreciated > > Jody > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
