Bobby, The only way you're going to make them synch is that both versions have to be exactly the same.....you cannot mix synch them if they are 2 different versions......otherwise you're wasting precious time good luck
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bobby Dole Sent: Thursday, December 13, 2007 2:20 AM To: [email protected] Subject: KX-T: KXTD 1232 Master slave setup I'm expanding a setup for someone who I had installed a single 1232 for. They have grown to need more than 32 digital extensions so I am having to use a master slave setup for the first time. I hooked them up as I think they should be with a 192 connection kit and I can't get the master to see the slave. I'm not sure what troubleshooting I can do to find out what the issue is. I was able to get to each system with programmator and the master rom version is p231491227a and the slave is P211q20604a I've tried powering them on in different orders and power cycling both, but to no avail. one thing I found odd was that even though it said it didn't see if whenever the slave was on I couldn't save any programming to the master. And when I was just hooked to the slave it wouldn't save there either. Any guidance anyone can offer would be very appreciated. ____________________________________________________________________________ ________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
