My guess is the surge protector...sounds like it is breaking down and
tripping ringing...often after multiple hits the breakdown voltage gets
lower and lower...
I also had a problem once where a cordless set was not seated well in the
base and it was "self answering" after a couple of rings....cleaning the
contacts solved the problem.
Jim
----- Original Message -----
From: "Dallas Dingle" <[email protected]>
To: <[email protected]>
Sent: Friday, February 12, 2010 3:36 PM
Subject: KX-T: 824 Cuts out after 4 or 5 Rings
I am troubleshooting an 824. It has 2 incoming COs. If one is busy it rolls
to the second line after 6 rings. Recently when people call in on the main
or first line it rings 3 or 4 times there is slight "pop" like a
disconnect
and they lose the connection. I had Qwest out and they rang the line out
and
they claim all is fine. Today I had the Alarm company switch their
connection to the fax line. It is not connected to the KSU. I just tried
it
and almost every time it pops and cuts out after a few rings. I am
somewhat
distant from the sight, so I am trying to gain any insight I can before
taking another look. I wonder if the KSU could be causing the problem?
Anyone had a similar problem? The only other thing in the loop is the
Panamax phone line surge protector.
Thanks
Dallas Dingle
--
www.supercalibrations.com
_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
