Have you been successful running the program on windows 7? Bill
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Wolfgang Sent: Tuesday, March 22, 2011 7:08 PM To: 'Panasonic KX-T telephone system discussion list' Subject: Re: KX-T: KX-TA824 Hello Rich, Here is what I do on my service laptops. In install the software Create a folder called USB Drivers Install the software again. I must be patient and wait for the installation to complete At the very end it will ask if you want to install USB drivers Click yes and browse to the USB Drivers folder and load them there. Now you are ready for first time use..... Start the program, then plug in the USB Cable It will look for the driver automatically If not found it will allow you to manually point to the folder you created "USB DRIVERS" and will then install the USB drivers Now you are ready to program OK? Wolfgang NTC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rick Aldrich Sent: Tuesday, March 22, 2011 19:17 To: [email protected] Subject: KX-T: KX-TA824 Hello, I recently installed a new KX-TA824, I am trying to connect to the PBX via USB. When I originally installed the software it asked for a USB driver that is not on the Disk "Panasonic Analog PBX USB Main Unit Driver" Does anyone know how to find this or have a fix for it? Thanks, Rick _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
