Brad What Michael is looking for is the bit in the 990 codes that keeps layer one high when the KXTD is connected to certain ISDN exchanges here in Ireland.
Michael It is area 4 bit 14, set it to 1 and restart the system Jody On 17/09/2011 17:18, "Brad Allen" <[email protected]> wrote: > I am a certified Lucent 5ESS tech and have never heard of any lowering or > raising a layer. I do know of two types of ISDN which the one you would most > likely use is National. The other one is Custom and I know for a fact you > don't have that one. Maybe your terms are different from mine, just what is > this low or high supposed to do? Brad 40+ years Telco, 20+ digital network. > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Michael Duffy > Sent: Friday, September 16, 2011 15:51 > To: KXT Mailing list > Subject: KX-T: ISDN on a KXTD1232 > > > Hi all > > Does anybody remember the area field for changing the ISDN layer high or low > depending on the type of exchange the ISDN was coming from. > > My colleagues in ireland or uk might remember > > Regards > Michael > Michael Duffy > > Mobile 087 2839293 > Service Maintainence of Telephone Systems > Alcatel Panasonic Siemens Toshiba Eircom Business > Sent from my BlackBerryR smartphone > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
