This may answer a few of your questions, In the digital systems, all communications between the ksu and the digital proprietary phones are completely digital signals on one pair of wires.
In the analog systems, the analog proprietary phones have signaling on one pair of wires and analog voice on the other pair of wires. Panasonic made all the KXT digital systems backward compatible with the older analog phones, it will sense what type of phone is plugged in. If it is a standard POTS phone, it will use the first pair for a completely analog connection. If it is a Pana analog/electronic phone set (7000 series for example) it will use the first and second pair. If it is a digital phone (7200 or 7400 series) it will only use the second pair, allowing you to use the first pair for either an analog parallel extension (same extension number) or an "xdp" analog port (unique analog pots extension). So features becomes part of the practical difference, but the way the signals travel is the technical difference. Charles [EMAIL PROTECTED] Global Communications Tarrytown, NY www.avtele.com www.telephonesecurity.com ----- Original Message ----- From: "Hostmaster" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 02, 2001 5:34 PM Subject: Re: KX-T: kxtd308/vps50 > Hello Telco Techs > > What is the difference between > a Hybrid PAN-KXTA1232 and a Digital Super Hybrid PAN-KXTD1232. > 1. OK The TD1232 can support a T1 card. Besides the obviously "Digital" T1 Card support, > What makes the TD1232 digital and the TA1232 analog I presume. > > 2. What makes the PAN-KXTD308 Digital & KXTA624 Analog etc? > > 3. The Phone Set Station outputs, I thought they all have digital + analog capability. > > 4. The CO ports, what is the difference in a TD model vs. a TA or analog model. > > 5. Is the fundamental diffence between the TD (Digital) and TA/T(Analog) model based on > features or is one really Digital and one Anaolog. Where does the Analog stop and Digital begin. > What is Panasonics definition of Digital vs. Analog as far as these Phone Systems are concerned. > > Thanks In Advance > > [EMAIL PROTECTED] > > telecom wrote: > > > Hello there all, > > > > Problem 1 > > I have a kxtd308 with kxtvps50 in a residence. All call on line 1 & 2 are delay to vps50 6 rings. VPS50 answers all call on Line 3 immedately. Now when a fax call comes in from a fax machine, the call is routed to fax extension port, but when a computer send a fax, the call is not sent to the fax port and is being routed to the call group that handles unaswered calls. I check all in programing and can not fine a solution. When listen with a test set I hear the fax machine sending beeping tones continuosly but with computers-fax the tones stops after two beeps. > > > > Problem 2 > > There is a gate at the drive entrance tied to line three. When L3 was delayed a call from gate would be answered by a person (before VPS50) the home owner would just enter 9 and the gate opens. But when the VPS50 route the call between gate (line 3) and phone user (any extention) dailing 9 does not do anthing. What I do not understand is the VPS50 drops off after connecting gate with an extension as it should, so why does it works if vps does not handle the call? > > > > Open for suggestions...and thanks > > > > Hope someone out there can help...oh... I > > > > ********************************************************* > > * To unsubscribe, e-mail [EMAIL PROTECTED] * > > * The KXT-Digest Home Page: http://kxthelp.com/ * > > ********************************************************* > > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > > ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
